My first ever spinning wheel broke this morning while spinning. See the parts on the right. I hope that John can fix it. If not, i can’t even think about spinning art yarn without my Louet S15.
Showing posts with label broken equipment. Show all posts
Showing posts with label broken equipment. Show all posts
Saturday, December 1, 2018
Monday, May 23, 2016
A Little Mishap
There are certain things in life that must be done methodically every time that they are done or things go wonky rather quickly. Take Eric's new lift for example. It is mounted to the ceiling with the lift being operated by a pneumatic air compressor which is operated by a switch. We ask everyone who uses it with Eric to make sure that it does not get tangled. Tangles always cause problems. I noticed that this mornings aide did not put the lift back on the charger, but failed to notice how badly tangled the wires were left until it was too late.
Do to tangling in the wires the pneumatic motor became disengaged, is simpler terms it broke at a most inconvenient time. Yes half way down. This left Eric miffed to be stuck in mid air. My tall guy was out and about an hour away. I am to short to reach up and fix it. The bed was to far from the problem to safely fix the lift. It would have been a very embarrassing call to 911. I can not lift Eric by myself. I finally found a step ladder so I could reach up and fix everything. The whole incident took less than 2 minutes, but to me it felt like hours. Eric's glares did not help much either, but I could not blame him, his ride broke midway through.
This will result in everyone who works with Eric to be retrained on the lift. I personally hate redundant training, but will do this because it is a safety issue.
By the time everything was fixed and I was calm enough to drive we had missed the movie that we wanted to go to across town and hurried to catch a later showing at another theater. By the way we went to see Zootopia. It is a must see movie for this summer.
By the way as long as we are talking about retraining, I would like to mention that a movie theaters the handicapped seating is for those who truly need to use them. For example people in wheelchairs and their companions, people who use walkers or canes and have other mobility issues. You just do not know how hard it is to move a wheelchair through those heavy doors to go to the other side. I think it would be much easier to move your able body self and kids a few seat and show some manners. I am off my soap box now.
Do to tangling in the wires the pneumatic motor became disengaged, is simpler terms it broke at a most inconvenient time. Yes half way down. This left Eric miffed to be stuck in mid air. My tall guy was out and about an hour away. I am to short to reach up and fix it. The bed was to far from the problem to safely fix the lift. It would have been a very embarrassing call to 911. I can not lift Eric by myself. I finally found a step ladder so I could reach up and fix everything. The whole incident took less than 2 minutes, but to me it felt like hours. Eric's glares did not help much either, but I could not blame him, his ride broke midway through.
This will result in everyone who works with Eric to be retrained on the lift. I personally hate redundant training, but will do this because it is a safety issue.
By the time everything was fixed and I was calm enough to drive we had missed the movie that we wanted to go to across town and hurried to catch a later showing at another theater. By the way we went to see Zootopia. It is a must see movie for this summer.
By the way as long as we are talking about retraining, I would like to mention that a movie theaters the handicapped seating is for those who truly need to use them. For example people in wheelchairs and their companions, people who use walkers or canes and have other mobility issues. You just do not know how hard it is to move a wheelchair through those heavy doors to go to the other side. I think it would be much easier to move your able body self and kids a few seat and show some manners. I am off my soap box now.
Subscribe to:
Posts (Atom)